Part # Keyword
Login   Signup   Forgot Password?  
Login (or create an account) Esc to Close

Username
Password
  Forgot password?               

Visit our Help section to get the most out of your visit.
 

You need to upgrade your Flash Player - version 7 or above is needed.

Tooling Columns - Square - Aluminum (MPCA)

MPCA-080821-400SL:Square Tooling Column - Aluminum - 8.00 in x 21.00 in - 12.00 in Hole Spacing


PartNumber Face Size A Face Size B Height C Hole Spacing D Hole Spacing E Hole Spacing F Size G mm Hole Spacing H Receiver Size mm Weight (lbs) CAD    

MPCA-080821-400SL		 8.00 8.00 21.00 4.75 9.50 19.05 400 12.00 25 145

MPCA-080821-400XX		 8.00 8.00 21.00 4.75 9.50 19.05 400 — 25 145

MPCA-080821-500SL		 8.00 8.00 21.00 4.75 9.50 19.05 500 16.00 25 165

MPCA-080821-500XX		 8.00 8.00 21.00 4.75 9.50 19.05 500 — 25 165

MPCA-080821-630SL		 8.00 8.00 21.00 4.75 9.50 19.05 630 20.00 25 215

MPCA-080821-630XX		 8.00 8.00 21.00 4.75 9.50 19.05 630 — 25 215

MPCA-101024-400SL		 10.00 10.00 24.00 6.75 11.00 22.05 400 12.00 25 195

MPCA-101024-400XX		 10.00 10.00 24.00 6.75 11.00 22.05 400 — 25 195

MPCA-101024-500SL		 10.00 10.00 24.00 6.75 11.00 22.05 500 16.00 25 215

MPCA-101024-500XX		 10.00 10.00 24.00 6.75 11.00 22.05 500 — 25 215

MPCA-101024-630SL		 10.00 10.00 24.00 6.75 11.00 22.05 630 20.00 25 265

MPCA-101024-630XX		 10.00 10.00 24.00 6.75 11.00 22.05 630 — 25 265

MPCA-121224-500SL		 12.00 12.00 24.00 8.75 11.00 22.05 500 16.00 25 250

MPCA-121224-500XX		 12.00 12.00 24.00 8.75 11.00 22.05 500 — 25 250

MPCA-121224-630SL		 12.00 12.00 24.00 8.75 11.00 22.05 630 20.00 25 280

MPCA-121224-630XX		 12.00 12.00 24.00 8.75 11.00 22.05 630 — 25 280

MPCA-161628-630SL		 16.00 16.00 28.00 12.75 13.00 26.05 630 20.00 25 425

MPCA-161628-630XX		 16.00 16.00 28.00 12.75 13.00 26.05 630 — 25 425

 
The ModLoc Modular Tooling Columns feature a unique design that consists of structural support brackets and sub-plates to form a tooling column that is as rigid and strong as traditional cast tombstones. These tooling columns are easily adapted to a variety of setups to help maximize the use of machining centers functional envelope. Because they are modular in design they permit flexible configurations that fully utilize the speed and accuracy of the SpeedLoc precision mounting and locating system. The open architecture allows these columns to easily accommodate hydraulic and electrical systems inside the column. This design also reduces the overall weight of the columns. All the tooling columns are supplied with four aluminum sub-plates. Each sub-plate comes with six Speedloc receivers for fast and accurate fastening of fixture plates to the sub-plates. The supplied sub-plates are made from MIC-6 aluminum. All sub-plates are precision ground to a minimum +/- .005 tolerance. The plates are edge prepped by grinding or milling to +/-.005. Supplied with docking plate hardware (MPDH-10001) on each of the four column faces. Tooling columns without docking plates are available by request. The bases are made from A36 steel. Part numbers ending with SL are supplied with four base mounting holes as shown on the drawing. Two holes are supplied with precision liners to be used with the SpeedLoc mounting system. Part numbers ending with XX designate user specified base mounting hole spacing. Fixtureworks can assist you to customize any of these products to meet your exact needs.

Select the following link for additional technical information.

© 2004-2010 Fixtureworks | 888-794-8687 | 33792 Doreka Drive | Fraser, Michigan 48026 USA Contact